Ich möchte mein Blog mal anders herum nutzen.
Wer weiß Rat ?
Ich habe mit XMMS und dem default output plugin oss funktionierenden Sound mit Kanotix 2005-02.
Anwendungen, die Alsa benutzen, wie z.B. mpg123 oder mp3blaster funktionieren nicht richtig.
Das äussert sich in einer extrem nervigen Wiederholungsschleife von ca. 0.5 Sekunden.
Mit einem /etc/init.d/alsa restart kann das natürlich unterbunden werden.
Spiele wie z.B. Supertux geben gar keinen Sound.
Nun sind ja extrem viele Module die mit Sound zu tun haben geladen, kann ich jetzt nicht posten, da nicht am Gerät.
Was mich interessieren würde, welche Module denn bei anderen mit der gleichen Soundhardware geladen sind.
Die Soundhardware ist Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
Ich bitte um Kommentare
Ich habe was im Netz gefunden, was vielleicht hilft: I'm running hoary with the 2.6.10 kernel and an ASUS a7v600-x motherboard with via8237 onboard sound.
Replacing the kernel did not fix my poor GStreamer and system sounds (way too much bass stutter), but adding this line to /etc/modprobe.d/alsa-base worked wonders (you can add the line to any file in the /etc/modprobe.d folder)
options snd_via82xx dxs_support=4
options snd_via82xx dxs_support=1 - worked almost as well. options snd_via82xx dxs_support=2 - froze xmms options snd_via82xx dxs_support=3 - poor GStreamer and system sounds
this website helped a lot: http://alsa.opensrc.org/index.php?page=via8233
an excerpt explaining dxs_support settings:
0 - the default value; set 48000 Hz only mode in most cases, except on some known motherboards (which are in the whitelist).
1 - enable full DXS support (at any supported sample rate).
2 - disable DXS support completely. In this case the hardware mixing ability of the chip is not used.
3 - use DXS at 48000 Hz only.
4 - enable DXS at any supported sample rate, but always set the codec to 48000 Hz (apparently on some motherboards this works better than dxs_support=1).
Und noch ein Hinweis parm: dxs_support int array (min = 1, max = 8), description "Support for DXS channels (0 = auto, 1 = enable, 2 = disable, 3 = 48k only, 4 = no VRA)"
Ja, von exakt diesem Problem laß ich neulich irgendwo auf einem Board. Lösung: Alsa weg, OSS rein. Den via82xx hab ich auch aus eigener Erfahrung in keiner guten Erinnerung...wiederum mit alsa. Nich so Toll, bin auch nicht wirklich glücklich geworden mit dem via-Geraffel. Bei Desktops lässt sich ja glücklicherweise über 'ne PCI-Karte o.ä. behelfen.
Merkwürdigerweise geht es in der Live Version. Leider hat sich das Problem erledigt ...
ich habe meine Platte geschlachtet
Ich habe im Titel einen Tipfehler korrigiert, deshalb ist dieser Eintrag wieder ganz vorne. Tja, da habe ich wohl einen Bug entdeckt. Oder ist es ein unwanted Feature ? ;